Deathwish Modz is reborn with the ReGenesis Kit.
The ReGenesis Mod
The single 21700 ReGenesis mechanical mod is the first released single battery side fire by Deathwish Modz. This mod is engineered to offer minimal voltage drop via its two-pronged contact firebar making it extremely hard hitting and consistent with every puff. Coupled with its unique ergonomic design and coffin shaped aesthetics, this makes the ReGenesis the perfect all-day carry.
Milled from a single billet of aluminium, sandblasted and anodized creating a durable and impressive finish. The engravings are hand painted, making the artwork come to life. (excluding Murdered Out).
The two-part heat-treated copper fire bar has been gold plated to ensure maximum conductivity while reducing maintenance but ensuring minimal voltage drop
The ergonomic design of the mod allows the user to hold the mod comfortably in the hand, with your fingers resting in a pleasant position on the fire button.
The fire button is designed so that pressure applied anywhere on the bar results in a smooth and even press every time, no matter which finger you use.
Designed in a way where the mod can be completely disassembled in under 5 minutes. The internals are neatly put together using a sled which is simple to remove for any maintenance. Held in place using high quality screws, once these screws are removed the sled should slide out without friction. This will expose the copper firebar for a quick clean.
For a more thorough clean a few more screws allow access to all parts. Making every section of the circuit accessible and visible. This level of maintenance ensures optimal performance.
Supporting up to 30mm RDA's without any overhang. This enables versatility to use any previous Deathwish Modz RDA's such as the 30mm Deathtrap.
The ReGenesis RDA
The Dual Coil 28mm ReGenesis RDA has a distinctive 2 post design. The Inverted crucifix posts are not only aesthetically pleasing but also functional. The posts ensure the juice flows to the cotton to keep wicking consistent. The posts also have squonk ports at the base, which allows the RDA to be used in squonk mode, using the squonk pin included in the box.
Being 28mm diameter, allows ample room for big beefy coils. We have tested this with up to 4mm ID coils, meaning you can have big chunky flavoursome coils with tonnes of clouds.
The posts are sat raised on a unique dome with a moat. The dome ensures juice flows into the moat along the outer edge of the RDA deck where your cotton sits, whether you drip or squonk, to ensure your cotton is always saturated minimising instances of dry hits and ensuring a perfect vape every time.
The moat holds 3.5ml of juice offering consistent cotton saturation and drastically decreases the chances of spitback. Never waste a drop
The airflow carries on the inverted crucifix aesthetics. The adjustable stepped and directional airflow perfectly aligns with your coils when locked in position, thus giving you an optimal vape based on your airflow preferences when cap is locked in place.
We have included a high level removable ultem chamber condenser to cater for individuals' preference. Due to the high position of the chamber, it has no bearing on the airflow coming in, its sole purpose is to reduce the chamber size.
- Height: 125mm
- Width: 47.5mm
- Depth: 85.25mm
- Product Weight: 350g
IN THE BOX
- 1 x COA Card
- 1 x Mech Safety Card
- 1 x ReGenesis Mech
- 1 x ReGenesis RDA
- 1 x Screwdriver
- Bag of Spares
Lithium Ion batteries should never be carried loose in pockets or bags. Always use the case provided.
- Never leave a battery unsupervised while it charges.
- If your battery wrap is torn or damaged, ensure it is replaced immediately especially if you use unregulated devices.
- MOLICEL's have around 500 charge cycles before a noticeable drop off in capacity.
- Always recycle your batteries, never crush or incinerate
For more information, visit www.DEATHWISHMODZ.com.
For a more detailed product breakdown, check out the Deathwish Modz Youtube channel pulldown video here.